|
Still deciding? Get samples of $ !
Request Sample
|
| Warranty: | 2 Years |
|---|---|
| Type: | Injection Blow Molding Machine |
| Raw Material: | PE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GS Injection blowing machine is widely used in pharma , drinking, food.... field.
General introduction
l Horizonal injection system plasticing reliable and easy operation. l Single crossbeam style clamping system.easy for mold amounting. l Variable delivery pump driving.energy saving.
l Big mold dimension output higher than same level machine.
Technical features:
l Horizontal injection: plasticizing stable, easy to operate
l Single beam clamping structure, it is more convenient to remove the mould l Variable pump control system, the electricity saving more
l Large capacity mold installation size, higher yield
| N | INJECTION SYSTEM | Unit | G-30S |
| Screw Diameter | Mm | 40 | |
| Screw L/D | 23:1 | ||
| Shot volume | Cm3 | 200 | |
| Max.screw speed | Rpm | 10-225 | |
| Heating capacity | Kw | 8.3 | |
| No of heating zone | Qty | 3+N | |
| Clamping and blowing system | |||
| Clamping force of injection | KN | 289.7 | |
| Clamping force of blowing | KN | 46.7 | |
| Opening stroke of mold platen | Mm | 120 | |
| Lifting H of rotary table | mm | 65 | |
| Max .platen size(L*W) | mm | 400*270 | |
| Min. mold thickness(H) | Mm | 180 | |
| Heating capacity of mold | KW | 3 | |
| STRIPPING SYSTEM | |||
| Stripping stroke | Mm | 220 | |
| Dry cycle | Sec | 3.5 | |
| DRIVING SYSTEM | |||
| Motor power | KW | 18.2 | |
| Hydraulic pressure | Mpa | 14 | |
| PRODUCT RANGE | |||
| Suitable bottle range | Ml | 5-800 | |
| Max. bottle height | mm | ≤190 | |
| Max .Dia of Bottle | Mm | ≤100 | |
| OTHERS | |||
| Min.air pressure | Mpa | 1 | |
| Discharge rate of compressed air | M3/mm | ≥0.7 | |
| Water flowage | M3/h | 3 | |
| Total rated power with mold heating | KW | 29.5 | |
| Dimension (L*W*H) | M | 3.56*1.25*2.25 | |
| Net weight | Ton | 4 |
){kind=link}